Water Filter

Benefits Of Hello Water Solutions

• The water coming out of my tap is cloudy or milky?
  This sometimes happens when you first install your new filter cartridge. The cloudiness is harmless, compressed air. To remove it, the cartridge needs to be flushed for 3-4 minutes. If your water pressure is low then it may need to be flushed for longer.
• The water flow out of my tap is very slow?
  There could be two reasons for this, either it’s to do with your water quality or water pressure. In harsh or problem water areas where the water quality is questionable, the water filter cartridge will fully load with impurities in a shorter period of time. The filter is still doing its job of removing impurities but you'll just have to change the cartridge more frequently. If the system is not in a problem water area then it could be to do with the water pressure in your region. Filter systems need good water pressure to enable the water to be forced through the filter media. If incoming water pressure is low to start then the flow will be slow. Please note that the water filter systems will not work within a gravity fed system.
• My filtered water has stopped coming out of the tap all of a sudden. What's wrong?
  Either the cold water is turned off under the sink or the cartridge is fully loaded with particles. Do you have any building or council works going on in you area? Sometimes if the council are clearing pipes or laying new pipes, they can allow large waste deposits into the water lines and this will clog up the system with dirt or particles. Call Hydrolink Plumbing on 0433 629 517.
• My water filter is leaking.
  Please shut off your system and call Hydrolink Plumbing on 0433 629 517.